Kitchen Door Overlays Profiles

• Measurement tolerance specification allows dimension(width, height, depth), gap, or reveal to be off as much as 1/16".

Full Overlay

Full Overlay (FOL) doors are sized to cover the majority of the face frame. FOL has concealed hinges and do require periodic adjustment. Door/Drawer hardware is required. Gapping between doors and drawer fronts will need to be adjusted for final installation.

• Wall cabinets have the same reveal as the base cabinets:
  1/2" on top and bottom and 1/4" on sides.
• Wall cabinets are symmetric.

Inset

Inset doors are virtually part of the cabinet face frame. This provides a smooth cabinet front alignment. Inset cabinets have visible hinges and will need additional adjustment after each heating and cooling season. Door/Drawer Hardware is required.

the center rail for inset DB30 2 & DB36 2 is 1 1/2" high

• Inset wall cabinets have the same outside face frame dimensions and the standard 1/8" drawer/door opening gap.
• Wall cabinets are symmetric.